Coaxial Cable Replacement - Global Positioning System (GPS)

Coaxial Cable Replacement - Global Positioning System (GPS)

Removal Procedure

1. Remove the rear compartment trim.
2. Remove the rear shelf trim cover.




3. Disconnect the global positioning system (GPS) antenna coax cable (3).




4. Disconnect the coax cable (1) at the interface module.
5. Pull the cable (1) through to the rear compartment.

Installation Procedure




1. Connect the cable (1) to the interface module.
2. Push the cable (1) through the rear compartment to the passenger compartment.




3. Connect the cable (3) the GPS antenna.
4. Install the rear shelf trim cover.
5. Install the rear compartment trim.