Radio Speaker Amplifier Scan Tool Information
WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
Amplifier (Bose) Scan Tool Data Parameters
| Parameter | System State | Expected Value | Description |
|---|---|---|---|
| Operating Conditions: Ignition ON, Radio OFF | |||
| Auto Volume Control | - | Off | The scan tool displays On or Off. This is the state of the automatic volume control. |
| Battery Voltage Signal | - | Varies | This displays volts. This is the current battery voltage signal. |
| Center Mid Range Speaker | - | Off | The scan tool displays On or Off. This is the state of the center mid range speaker. |
| DSP Status | - | Off | The scan tool displays Off, Talk, Driver Seat or Spacious. |
| Headrest Left Speakers | - | Off | The scan tool displays On or Off. This is the state of the left speakers in the headrest. |
| Headrest Right Speakers | - | Off | The scan tool displays On or Off. This is the state of the right speakers in the headrest. |
| Left Full Range Speaker | - | Off | The scan tool displays On or Off. This is the state of the driver full range speaker. |
| LF Subwoofer Status | - | Off | The scan tool displays On or Off. This is the state of the driver front subwoofer. |
| Microphone High | - | Varies | This displays a numeric value. |
| Microphone Low | - | Varies | This displays a numeric value. |
| Mute Status | - | Off | The scan tool displays On or Off. This is the state of the mute. |
| Phone Signal | - | Inactive | The scan tool displays Active or Inactive. This is the state of the phone signal. |
| Radio Left Channel | - | Off | The scan tool displays On or Off. This is the state of the radio left channel. |
| Radio Right Channel | - | Off | The scan tool displays On or Off. This is the state of the radio right channel. |
| RF Full Range Speaker | - | Off | The scan tool displays On or Off. This is the state of the passenger full range speaker. |
| RF Subwoofer Status | - | Off | The scan tool displays On or Off. This is the state of the passenger front subwoofer. |
Amplifier (Bose) Scan Tool Output Controls
| Output Control | Description |
|---|---|
| Center I/P Speaker | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
| LF I/P Speaker | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
| LF Subwoofer Speaker | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
| LR Seat Speaker | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
| RF I/P Speaker | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
| RF Subwoofer Speaker | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
| RR Seat Speaker | Commanding the speaker ON will turn off all speakers except this speaker. Commanding the speaker OFF will turn off all speakers. |
| Microphone Test | Tests the noise compensation microphone operation. |