Low and Reverse Clutch Piston Removal
WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
Low and Reverse Clutch Piston Removal
| Callout | Component Name |
|---|---|
| 1 | Low and Reverse Clutch Spring Retaining Ring
CAUTION:
DT-49122 must be used with the DT-48069 in order to prevent damage to the low clutch sprag retainer.
Special Tool
|
| 2 | Low Clutch Sprag Assembly |
| 3 | Low and Reverse Clutch Spring |
| 4 | Low and Reverse Clutch Piston Assembly Tip: It may be necessary to apply air to the apply passage in order to unseat the piston. |
| 5 | Low Clutch Sprag Seal
CAUTION:
Refer to Seal Reuse Caution
.
|