LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> CTS V >> Repair and Diagnosis >> External Pages >> Different car >> Section 559 (Seat Hardware, Seat Trim, And Upholstery) >> Repair Instructions >> Front Seat Riser Finish Cover Replacement

Front Seat Riser Finish Cover Replacement

WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View of Front Seat Riser Finish Cover and Components
GM1702626Courtesy of GENERAL MOTORS CORP.
Callout Component Name
1 Seat Adjuster Switch Bezel
Tip: 
  1. Pull the seat switch bezel away from the seat to disengage the retainers.
  2. Disconnect the electrical connectors.
  3. If replacing the bezel transfer the switches.
2 Seat Adjuster Switch Bezel Retainer (Qty: 5)
3 Seat Cushion Front Cover
Tip:  Pull the cover away from the seat to disengage the retainers.
4 Seat Cushion Front Cover Retainer (Qty: 5)
5 Seat Recliner Inner Finish Cover
Tip:  Seat or center console may have to be loosened to get enough room to pull the cover away from the seat.
6 Seat Recliner Inner Finish Cover Retainer (Qty: 2)
7 Seat Recliner Outer Finish Cover
Tip: 
  1. Disconnect the seat belt from the seat.
  2. Use a trim tool, or equivalent to remove the finish cover from the seat.
8 Seat Recliner Outer Finish Cover Retainer (Qty: 3)
9 Seat Adjuster Finish Cover
Tip:  Pull the cover rearward from the seat to disengage the retainers.
10 Seat Adjuster Finish Cover Retainer (Qty: 4)
scientia non olet · About LEMON Manuals