Installation Procedure
- Install the rear compartment lid drain plugs into the rear compartment lid.
- Install the rear compartment lid overslam bumpers to the rear compartment lid.
- Install the rear compartment lid latch. Refer to Rear Compartment Lid Latch Replacement .
- Install the rear compartment lid applique. Refer to Rear Compartment Lid Applique Replacement .
- Install the rear compartment lid wiring harness to the rear compartment lid.
- Install the rear compartment lid to the vehicle with an assistant.NOTE: Refer to Fastener Notice.
Install the bolts in order to secure the rear compartment lid to the rear compartment lid to the hinge.
Tighten: Tighten the bolts to 25 N.m (18 lb ft).
- Install the rear compartment lid strut rod. Refer to Rear Compartment Lid Strut Replacement (Coupe/Sedan) .
- Adjust rear compartment lid as necessary. Refer to Rear Compartment Lid Adjustment .
- Connect the rear compartment lid wiring harness to the body main harness.
- Install the rear compartment lid trim panel. Refer to Compartment Lid Trim Replacement - Rear .
- Close the rear compartment.