LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> CTS V >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Primary and Secondary Latch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Hood Latch & Hood Release Cable
    GM327806Courtesy of GENERAL MOTORS CORP.
  1. Connect the hood release cable (1) to the hood latch (2).
    2. Fig 2: View Of Hood Latch
    GM743349Courtesy of GENERAL MOTORS CORP.
  2. Position the hood latch (2) to the vehicle.
    3. NOTE: Refer to FASTENER NOTICE .
  3. Install the bolts (1) to secure the hood latch to the vehicle.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  4. Adjust the hood primary latch (2). Refer to Hood Latch Adjustment .
scientia non olet · About LEMON Manuals