LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> CTS V >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Open Assist Rod Replacement >> Removal Procedure

Removal Procedure

CAUTION: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.
NOTE: Apply pressure only at the end of the liftgate/hood assist rod that you are removing or attaching. Do NOT apply pressure to the middle of the rod because damage or bending will result.
    Fig 1: View Of Upper Hood Assist Rod
    GM738138Courtesy of GENERAL MOTORS CORP.
  1. Open and support the hood.
  2. Using a small flat-bladed tool, release the clip retaining the hood assist rod to the lower assist rod ball stud (3).
  3. Using a small flat-bladed tool, release the clip retaining the hood assist rod to the upper assist rod ball stud (1).
  4. Remove the hood assist rod (2) from the vehicle.
scientia non olet · About LEMON Manuals