LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> CTS V >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Brace Replacement - Cross Vehicle >> Installation Procedure

Installation Procedure

    Fig 1: View Of Cross Vehicle Brace
    GM1216004Courtesy of GENERAL MOTORS CORP.
  1. Install the cross vehicle brace to the vehicle.
    2. NOTE: Refer to Fastener Notice .
  2. Install the bolts to the cross vehicle brace.

    Tighten:  Tighten the cross vehicle brace bolts to 25 N.m (18 lb ft).

  3. Close the hood.
scientia non olet · About LEMON Manuals