Installation Procedure

Fig 1: Identifying Upper Hood Assist Rod Ball Stud & Hood

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE .

Install the upper assist rod ball stud (2) to the hood (1).
Tighten: Tighten the upper hood assist rod ball stud (2) to 9 N.m (80 lb in).

Fig 2: View Of Lower Hood Assist Rod Ball Stud & Fender

Courtesy of GENERAL MOTORS CORP.

Install lower ball stud (1) to the fender (2).
Tighten: Tighten the lower hood assist rod ball stud (1) to 9 N.m (80 lb in).
Install assist rod. Refer to Hood Open Assist Rod Replacement .