LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> CTS V >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Repair Instructions >> Instrument Cluster Replacement >> Removal Procedure

Removal Procedure

  1. Remove the instrument panel (I/P) cluster trim cover. Refer to Instrument Cluster Trim Panel Replacement .
    2. Fig 1: View Of I/P Cluster Screws & Electrical Connector
    GM700900Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws (2) securing the cluster to the I/P.
    3. Fig 2: Releasing I/P Cluster Retainers
    GM717265Courtesy of GENERAL MOTORS CORP.
  3. Install a small flat bladed tool (1) between the I/P cluster and the I/P.
  4. Pry up on the I/P in order to release the retainers on the cluster.
  5. Pull out on the cluster and disconnect the electrical connectors.
scientia non olet · About LEMON Manuals