LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> CTS V >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays And Gauges >> Repair Instructions >> Instrument Cluster Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of I/P Cluster Screws & Electrical Connector
    GM700900Courtesy of GENERAL MOTORS CORP.
  1. Position the cluster on the I/P.
  2. Connect the electrical connectors (1) on the back of the cluster.
  3. Push the cluster into the I/P in order to lock in the cluster retainers.
    NOTE: Refer to Fastener Notice .
  4. Install the fasteners (2) in order to secure the cluster to the I/P.

    Tighten:  Tighten the fasteners to 2 N.m (18 lb in).

  5. Refer to Control Module References for programming and setup information.
scientia non olet · About LEMON Manuals