Driver Information Center (DIC) Switch(es) Inoperative

Step	Action	Yes	No
Schematic Reference: Driver Information System Schematics Connector End View Reference: Displays and Gages Connector End Views
1	Did you review the operation and perform the necessary inspections?	Go to Step 2	Go to Diagnostic System Check - Vehicle
2	Inspect for poor connections at the radio. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs . Did you find and correct the condition?	Go to Step 4	Go to Step 3
3	Replace the radio. Refer to Control Module References for replacement, setup, and programming. Did you complete the replacement?	Go to Step 4	-
4	Operate the system in order to verify the repair. Did you correct the condition?	System OK	Go to Step 2