LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel Trim Panel Replacement - Left Side >> Removal Procedure

Removal Procedure

  1. Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .
    2. Fig 1: View Of Trim Panel & I/P Carrier
    GM1224717Courtesy of GENERAL MOTORS CORP.
  2. Remove the retaining screw at the bottom of the trim panel.
  3. Pull the left trim panel outward to disengage the retaining clips from the I/P carrier.
    4. Fig 2: View Of Ignition Switch & Electrical Connector
    GM1224598Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical connectors.
    5. Fig 3: View Of DIC Switch Pod
    GM1224702Courtesy of GENERAL MOTORS CORP.
  5. Remove the electrical switches.
scientia non olet · About LEMON Manuals