LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel Trim Panel Replacement - Left Side >> Installation Procedure

Installation Procedure

    Fig 1: View Of DIC Switch Pod
    GM1224702Courtesy of GENERAL MOTORS CORP.
  1. Install the electrical switches to the I/P trim panel.
  2. Connect the electrical connections to the I/P trim panel.
  3. Push on the left trim panel to engage the retaining clips to the I/P carrier.
    4. Fig 2: View Of Trim Panel & I/P Carrier
    GM1224717Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the retaining screw at the bottom of the trim panel.

    Tighten:  Tighten the screw to 1.9 N.m (17 lb in).

  5. Install the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .
scientia non olet · About LEMON Manuals