Removal Procedure

Fig 1: View Of I/P Courtesy Lamp Assembly & Lower Closeout Panel

Courtesy of GENERAL MOTORS CORP.

Using a flat bladed tool, carefully pry the I/P courtesy lamp assembly from the right lower closeout panel.

Fig 2: View Of Lower Right Closeout Panel

Courtesy of GENERAL MOTORS CORP.

Remove the push-in retainers on the right lower closeout panel from the I/P lower support beam.
Lower the closeout panel slightly, and carefully maneuver the left side of the closeout panel from above the driveline tunnel.
Insert the I/P courtesy lamp assembly up through the opening in the closeout panel.
Continue to lower the closeout panel, then pull to remove the closeout panel from the dash.