Installation Procedure

Fig 1: View Of Lower Left Closeout Panel

Courtesy of GENERAL MOTORS CORP.

Insert the I/P courtesy lamp down through the opening in the closeout panel.
Install the closeout panel into position.
Secure the closeout panel push-in retainers to the I/P lower support beam.
Secure the notch in the fight forward edge of the closeout panel to the tab on the accelerator pedal bracket.
Align, then push up to secure the panel.
Install the push-on retaining nut to the steering column bracket stud.

Fig 2: View Of I/P Courtesy Lamp Assembly & Lower Closeout Panel

Courtesy of GENERAL MOTORS CORP.

Align the I/P courtesy lamp to the closeout panel opening, then push to secure the lamp.