LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Cluster Head Up Display Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of HUD
    GM1224615Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution.
  1. Disconnect the negative battery cable.
  2. Remove the I/P carrier. Refer to Instrument Panel Carrier Replacement .
  3. Carefully lift the head-up display (HUD) electrical harness from between the instrument panel cluster (IPC) and the HUD.
  4. Disconnect the HUD electrical connector from the IPC.
    5. Fig 2: View Of IPC & Screws
    GM1224708Courtesy of GENERAL MOTORS CORP.
  5. Remove the retaining screws that secure the IPC to the steering column bracket.
  6. Raise the rear of the IPC slightly to release the locator tab. Reposition the IPC to access the retaining screw that secures the HUD to the steering column bracket.
    7. Fig 3: View Of HUD
    GM1224615Courtesy of GENERAL MOTORS CORP.
  7. Loosen the retaining screw that secures the HUD to the steering column bracket.
  8. Remove the HUD retaining nuts.
  9. Remove the HUD from the vehicle.
scientia non olet · About LEMON Manuals