LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Head Up Display Switch Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of HUD Switch Assembly
    GM1224608Courtesy of GENERAL MOTORS CORP.
  1. Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .
  2. Remove the retaining screw from the I/P dimmer/head-up display (HUD) switch assembly.
  3. Disconnect the HUD electrical connector.
  4. Remove the screws with secure the retaining switch to the bezel.
scientia non olet · About LEMON Manuals