LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Driver Knee Bolster Panel Replacement >> Removal Procedure

Removal Procedure

  1. Remove the fuel door and the rear compartment lid release switch.
    1. Pry carefully at the lower edge of the switch to release the locking tab.
    2. Disconnect the electrical connector from the switch.
    2. Fig 1: View Of Driver Knee Bolster Trim Panel & Screws
    GM1224656Courtesy of GENERAL MOTORS CORP.
  2. Remove the lower retaining screws from the driver knee bolster trim panel.
  3. Grasp the trim panel at the side edges.
  4. Pull firmly rearward to release the locking tabs.
  5. Remove the trim panel.
scientia non olet · About LEMON Manuals