LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Driver Knee Bolster Bracket Replacement >> Removal Procedure

Removal Procedure

  1. Remove the driver knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .
    2. Fig 1: View Of Left Knee Bolster Bracket & Bolts
    GM1224676Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The following step must be performed to assure proper trim fits during installation.
  2. Mark the location of the driver knee bolster bracket.
  3. Remove the screws retaining the driver knee bolster bracket to the steering column bracket.
  4. Remove the driver knee bolster bracket.
scientia non olet · About LEMON Manuals