LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Driver Knee Bolster Bracket Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Left Knee Bolster Bracket & Bolts
    GM1224676Courtesy of GENERAL MOTORS CORP.
  1. Install the driver knee bolster bracket into position as marked prior to removal.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screws which retain the driver knee bolster bracket to the steering column bracket.

    Tighten:  Tighten the screws to 1.9 N.m (17 lb in).

  3. Install the driver knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .
scientia non olet · About LEMON Manuals