LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Driver Information Display Switch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the knee bolster trim panel. Refer to Driver Knee Bolster Panel Replacement .
    2. Fig 1: View Of Driver Knee Bolster Trim Panel & Screws
    GM1224656Courtesy of GENERAL MOTORS CORP.
  2. Remove the retaining screws from the bottom of the switch pad.
  3. Pull outward to disengage the retaining clip.
  4. Disconnect the electrical connectors.
    5. Fig 2: View Of DIC Switch Pod
    GM1224702Courtesy of GENERAL MOTORS CORP.
  5. Remove the retaining screws from the DIC switch.
  6. Remove the DIC switch.
scientia non olet · About LEMON Manuals