LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Console Compartment Door Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Console Door & Hinge
    GM1277226Courtesy of GENERAL MOTORS CORP.
  1. Position the console door and the hinge to the console.
    2. NOTE: Refer to Fastener Notice .
  2. Install the nuts retaining the door hinge to the console.

    Tighten:  Tighten the nuts to 10 N.m (89 lb in).

    3. Fig 2: View Of Console Door To Hinge Screws
    GM1224732Courtesy of GENERAL MOTORS CORP.
  3. Install the screws retaining the door and the hinge to the console.

    Tighten:  Tighten the screws to 1.9 N.m (17 lb in).

  4. Install the console hinge cover to the console bin.
  5. Close the console door. Verify for proper fit and latch operation.
scientia non olet · About LEMON Manuals