Chime Always On
Chime Always On
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Audible Warnings Schematics Connector End View Reference: Instrument Panel, Gages, and Console Connector End Views |
|||
| 1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | Go to Diagnostic System Check - Vehicle |
| 2 | Turn ON the ignition. Are any indicators/messages illuminated? |
Go to Indicator/Warning Message Description and Operation | Go to Step 3 |
| 3 |
|
Go to Step 4 | Go to Testing for Intermittent Conditions and Poor Connections |
| 4 | Replace the body control module (BCM). Refer to Control Module References
for replacement, setup, and programming. Did you complete the replacement? |
Go to Step 5 | - |
| 5 |
|
System OK | Go to Step 1 |