Propeller Shaft Transmission Flange Installation (6L50)
WARNING: This page is about a different car, the 2009 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Prop Shaft Trans Flange |
| 2 | NEW Front Prop Shaft Flange Nut
CAUTION:
Refer to Fastener Caution
.
Tighten: 105 N.m (77 lb ft). Special Tool: J 45012 Holding Fixture. See Special Tools . |
| 3 | Output Shaft
CAUTION:
Stake the flange nut onto the output shaft. Use the two staking grooves on the shaft to locate the staking points. Failure to stake the flange nut may result in damage to the transmission.
|