Installation Procedure

Fig 1: View Of Front Floor Console Cupholder Screws

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the screws (1) securing the cupholder to the top of the console.
Tighten: Tighten the screws to 2 N.m (18 lb in).

Fig 2: View Of Front Floor Console Underside

Courtesy of GENERAL MOTORS CORP.

Install the screws (1) securing the cupholder to the console.
Tighten: Tighten the screws to 2 N.m (18 lb in).

Fig 3: View Of Front Floor Console Center HVAC Duct

Courtesy of GENERAL MOTORS CORP.

Install the screws (1) securing the center HVAC duct.
Tighten: Tighten the screws to 2 N.m (18 lb in).

Fig 4: View Of Front Floor Console Front HVAC Duct

Courtesy of GENERAL MOTORS CORP.

Install the front HVAC duct (1).
Install the screws (2) securing the side impact brace.
Tighten: Tighten the screws to 2 N.m (18 lb in).
Install the center console. Refer to Front Floor Console Replacement .