79. Oil Pump Pipe and Screen Cleaning and Inspection

Oil Pump Pipe and Screen Cleaning and Inspection
Cleaning Procedure
1. Clean the oil pump pipe and screen with solvent.

2. Caution: Refer to Safety Glasses Caution in Service Precautions.

Dry the oil pump pipe and screen with compressed air.

Inspection Procedure





1. Inspect the gasket sealing surface (1) for damage.
2. Inspect the oil pump pipe tube (2) for cracks, imperfections and/or damage.
3. Inspect the mounting bracket (3) for distortion or damage.
4. Inspect the oil pump screen (4) for blockage, foreign material, tears, cracks and/or damage.
5. Replace the oil pump pipe and screen as necessary.