LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS RWD V8-4.6L VIN A >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Repair Instructions >> 136. Drive Belt Idler Pulley Installation

136. Drive Belt Idler Pulley Installation



Drive Belt Idler Pulley Installation





1. Place the drive belt idler pulley in position to the engine.

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the drive belt idler pulley bolt.
^ Tighten the drive belt idler pulley bolt to 50 Nm (37 ft. lbs.).
scientia non olet · About LEMON Manuals