LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS RWD V8-4.6L VIN A >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Idler Pulley >> Service and Repair

Idler Pulley: Service and Repair



Drive Belt Idler Pulley Replacement
Removal Procedure
1. Remove the air conditioning, power steering and water pump drive belt.





2. Remove the drive belt idler pulley bolt.
3. Remove the drive belt idler pulley.

Installation Procedure





1. Install the drive belt idler pulley.

2. Notice: Refer to Fastener Notice in Service Precautions.

Install the drive belt idler pulley bolt.
^ Tighten the drive belt idler pulley bolt to 50 Nm (37 ft. lbs.).
3. Install the drive belt.
scientia non olet · About LEMON Manuals