Radiator Surge Tank Outlet Hose/Pipe Replacement

Surge Tank Hose/Pipe Replacement - Outlet (LH2)
Removal Procedure





1. Drain the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (GE 47719) .
2. Remove the fuel injector sight shield.
3. Compress the clamp (1) and remove the surge tank outlet hose from the surge tank (2).





4. Separate the hose (2) from the retaining features (1 and 3) on the front of dash.





5. Compress the clamp (2) and remove the surge tank outlet hose from the heater hose (1).
6. Remove the surge tank outlet hose/pipe from the engine compartment.

Installation Procedure





1. Position the surge tank outlet hose/pipe to the engine compartment.
2. Compress the clamp (2) and connect the surge tank outlet hose to the heater hose (1).





3. Install the hose (2) to the retaining features (1 and 3) on the front of dash.





4. Compress the clamp (1) and connect the surge tank outlet hose to the surge tank (2).
5. Install the fuel injector sight shield.
6. Fill the cooling system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (GE 47719) .