Shelf Carrier Replacement - Rear

Shelf Carrier Replacement - Rear

Removal Procedure

1. Remove rear shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf (Removal and Replacement) .




2. Remove the 7 fasteners securing the carrier assembly to the rear shelf.
3. Disconnect the electrical connectors.
4. Remove the rear shelf carrier assembly.



Installation Procedure

1. Install rear shelf carrier assembly.
2. Connect the electrical connectors.





Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the rear shelf carrier fasteners.

Tighten the rear shelf carrier fasteners to 9 N.m (80 lb in).

4. Install the rear shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf (Removal and Replacement) .