Rear Shelf: Service and Repair

SHELF CARRIER REPLACEMENT - REAR

REMOVAL PROCEDURE
1. Remove rear shelf trim panel.




2. Remove the 7 fasteners securing the carrier assembly to the rear shelf.
3. Disconnect the electrical connectors.
4. Remove the rear shelf carrier assembly.

INSTALLATION PROCEDURE
1. Install rear shelf carrier assembly.
2. Connect the electrical connectors.




3. Install the rear shelf carrier fasteners.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the rear shelf carrier fasteners to 9 N.m (80 lb in).

4. Install the rear shelf trim panel.