LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS RWD V8-4.6L VIN A >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Console >> Service and Repair >> Procedures >> Front Floor Console Cup Holder Replacement

Front Floor Console Cup Holder Replacement



FRONT FLOOR CONSOLE CUP HOLDER REPLACEMENT

REMOVAL PROCEDURE
1. Remove the center console.




2. Remove the front HVAC duct (1).
3. Remove the screws (2) securing the side impact brace.




4. Remove the screws (1) securing the center HVAC duct.




5. Remove the screws (1) securing the cupholder to the console.




6. Remove the screws (1) securing the cupholder to the top of the console.

INSTALLATION PROCEDURE




1. Install the screws (1) securing the cupholder to the top of the console.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).




2. Install the screws (1) securing the cupholder to the console.

Tighten the screws to 2 N.m (18 lb in).




3. Install the screws (1) securing the center HVAC duct.

Tighten the screws to 2 N.m (18 lb in).




4. Install the front HVAC duct (1).
5. Install the screws (2) securing the side impact brace.

Tighten the screws to 2 N.m (18 lb in).

6. Install the center console.

scientia non olet · About LEMON Manuals