Front Floor Console Armrest Replacement

FRONT FLOOR CONSOLE ARMREST REPLACEMENT

REMOVAL PROCEDURE
1. Remove the console end panel.




2. Remove the 2 outer bolts and loosen the 2 inner bolts securing the armrest assembly to the console.
3. Slide the armrest out in order to remove it.

INSTALLATION PROCEDURE
1. Locate the armrest to the center console.
2. Install the 4 bolts securing the armrest to the console.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the bolts to 2 N.m (18 lb in).

3. Install the console end panel.