Speaker Replacement - Rear (Right)
SPEAKER REPLACEMENT - REAR (RIGHT)
REMOVAL PROCEDURE
1. Remove the rear shelf trim panel.
2. Remove the screws securing the right speaker (1).
3. Disconnect the electrical connector.
4. Remove the speaker (1).
INSTALLATION PROCEDURE
1. Install the speaker (1).
2. Connect the electrical connector.
3. Install the screws securing the right speaker (1).
Tighten the screws to 9 N.m (80 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
4. Install the rear shelf trim panel.