Radio Rear Side Door Speaker Replacement
RADIO REAR SIDE DOOR SPEAKER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the rear door trim panel.
2. Disconnect the electrical connector from the speaker.
3. Remove the 4 rear speaker fasteners.
4. Remove the rear speaker from the door trim panel.
INSTALLATION PROCEDURE
1. Install the rear speaker to the rear door trim panel.
2. Install the 4 speaker fasteners.
Tighten the speaker fasteners to 2.5 N.m (22 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Connect the electrical connector to the speaker.
4. Install the rear door trim panel.