Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTCs P0021, P0024, P0030, P0031, P0032, P0036, P0037, P0038, P0050, P0051, P0052, P0056, P0057, P0058, P0101, P0102, P0103, P0106, P0107, P0108, P0116, P0117, P0118, P0121, P0122, P0123, P0125, P0128, P0131, P0132, P0135, P0137, P0138, P0139, P0140, P0141, P0151, P0152, P0155, P0157, P0158, P0159, P0160, P0161, P0201-0208, P0221, P0222, P0223, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P0273, P0274, P0276, P0277, P0279, P0280, P0282, P0283, P0300, P0301-0308, P0335, P0336, P0340, P0341, P0345, P0346, P0351-0358, P0365, P0366, P0390, P0391, P0442, P0443, P0446, P0449, P0453, P0454, P0455, P0458, P0459, P0496, P2231, P2234, P2237, P2240, P2243, P2247, P2251, P2254, P2626, P2629, P167A, P167B are not set.
The HO2S Loop Status parameter is Closed.
The BARO parameter is more than 74 kPa.
The Engine Speed parameter is between 1,216-3,000 RPM.
The MAF Sensor parameter is between 13-83 g/s.
The catalyst diagnostic is running.
DTC P0133 or P0153 runs continuously once the above conditions are met.