LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS Base, 3.6 7, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Automatic Transmission - 6L80E) >> Repair Instructions >> Transmission Mount Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the exhaust system. Refer to Exhaust System Replacement .
  3. Support the transmission with a suitable jack and a block of wood.
  4. Remove the transmission vent hose from the retainers on the mount assembly.
  5. Remove the transmission mount support to body mounting bolts.
    6. Fig 1: Transmission Mount Support
    GM1649726Courtesy of GENERAL MOTORS CORP.
  6. Remove the transmission mount support to transmission mounting bolts.
  7. Remove the transmission mount support assembly from the vehicle.
scientia non olet · About LEMON Manuals