LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS Base, 3.6 7, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Automatic Transmission - 6L80E) >> Repair Instructions >> Transmission Control Lever Knob Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Shift Knob Replacement
    GM1649706Courtesy of GENERAL MOTORS CORP.
  1. Install the shift knob fully onto the shift control shaft.
    2. NOTE: Refer to Fastener Notice .
  2. Tighten the shift knob retaining screw.

    Tighten:  Tighten the screw to 2 N.m (18 lb in).

  3. Install the shift knob trim ring to the shift knob.
scientia non olet · About LEMON Manuals