No Third, Fifth, and Reverse Gear
WARNING: This page is about a different variant/trim than selected.
No Third, Fifth, and Reverse Gear
| Checks |
Causes |
| 1-2-3-4 and 3-5-R Clutch Assembly (51) |
- Inspect for damaged or worn 3-5-R clutch plates (402-404).
- Inspect for damaged 3-5-R clutch piston (421), apply ring (405), and spring (420).
- Inspect for cut, worn, or damaged 3-5-R clutch piston dam O-ring seal (418), inner seal (419), and outer seal (422).
- Inspect for improper selective 3-5-R clutch backing plate retaining ring (400).
- Inspect for damaged 3-5-R clutch backing plate (401). Inspect for worn splines on the backing plate.
|