No Drive in All Ranges

WARNING: This page is about a different variant/trim than selected.

Checks	Causes
4-5-6 (with Turbine Shaft) Clutch Assembly (56)	Inspect for damaged or worn 4-5-6 clutch backing plate (432). Inspect for damaged 4-5-6 clutch (with turbine shaft) housing assembly (441).
Output Carrier Assembly (68)	Inspect the carrier assembly for damaged pinion gears, thrust washers, pins, and rollers. Inspect for damaged thrust bearings (486 and 488). Inspect for damaged sun gears (487 and 489). Inspect the carrier assembly for damaged output carrier rear sun gear thrust bearing (captured).
Output Carrier Thrust Bearing Assembly (69)	Inspect the bearing for wear or damage.
Output Shaft Assembly (70)	Inspect for damaged internal gears (495 and 497).
Input Sun Gear Thrust Washer (55)	Inspect the washer for wear or damage.
Input Sun Gear Thrust Bearing (54)	Inspect the bearing for wear or damage.
Input Sun Gear (53)	Inspect for spline wear or damage.
Input Carrier Assembly (52)	Inspect carrier assembly for damaged pinion gears, thrust washers, pins, and rollers.
Turbine Shaft Thrust Bearing Assembly (57)	Inspect the bearing for wear or damage.
Fluid Filter Assembly (26)	Inspect for damaged or restricted fluid filter assembly (26). Inspect for damaged fluid filter seal assembly (25) or improper sealing interface, leaks, and fluid aeration.
Automatic Transmission Fluid Pump Seal (5)	Inspect for worn or damaged seal.