Typical Scan Tool Data
WARNING: This page is about a different variant/trim than selected.
IMS A/B/C/P
| Circuit | Normal Range | Short to Ground | Open | Short to Voltage |
|---|---|---|---|---|
| Operating Conditions: Ignition ON, range selector in Park | ||||
| Transmission Range Switch Signal A | LOW | LOW | HI | HI |
| Transmission Range Switch Signal B | HI | LOW | HI | HI |
| Transmission Range Switch Signal C | HI | LOW | HI | HI |
| Transmission Range Switch Signal P | LOW | LOW | HI | HI |
| HI = 12 volts LOW = 0 volts |
||||