Conditions for Setting the DTC: P1825

Any one or more of the following conditions:

• The IMS signal circuit A, B, or P are Low in Park for greater than 1 second.
• The IMS signal circuit A is Low in D6 for 8 seconds.
• The IMS signal circuit C is High in D6 for 8 seconds.
• The TCM detects an invalid range from the IMS for 3.25 seconds.
• The IMS signal circuit C is high in D6 for greater than 8 seconds and the engine torque is greater than 20 N.m (15 lb ft).
• Park/Neutral Switch equals P/N and the IMS state is not Park or Neutral, or the Park/Neutral switch is not Park or Neutral and the IMS state equals Park or Neutral for 4 seconds.