Circuit/System Description
WARNING: This page is about a different variant/trim than selected.
The transmission fluid pressure (TFP) switch 1 is part of the control solenoid (w/body and TCM) valve assembly and is not serviced separately. The TCM supplies 12 volts to the TFP Switch 1 on the TFP Switch 1 signal circuit; the TFP Switch 1 has an internal case ground. TFP Switch 1 is normally closed, Low. When oil pressure is present at the TFP Switch 1, the switch is Open, High. The normally high clutch pressure control (PC) solenoid 2 controls the transmission fluid to the 3-5-R clutch. The TCM monitors the normally closed TFP Switch 1 signal circuit to determine the 3-5-R clutch status.