LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS Base, 3.6 7, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Automatic Transmission - 6L80E) >> Diagnostic Information and Procedures >> DTC P0736 >> Component Testing

Component Testing

WARNING: This page is about a different variant/trim than selected.
  1. Perform the Line Pressure Check .
  2. Inspect the check ball 5 for possible sticking or damage.
    • If you found a concern with this check ball, repair the concern.
  3. Inspect the shift select valve 3 for sticking or damage.
    • If you found a concern with the shift select valve 3, repair or replace the valve or valve body.
  4. Inspect the low and reverse clutch assembly for wear or damage.
    • If you found a low and reverse clutch assembly concern, repair or replace the low and reverse clutch assembly as necessary.