Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0716
- The TCM detects an unrealistic drop in input shaft speed.
- ISS DTC P0716 is not failed this ignition.
- Transmission input speed is 686 RPM or greater for 2 seconds.
- Transmission input speed drops 653 RPM for greater than 4 seconds and does not recover.
P0717
- The TCM detects no output shaft speed when there is vehicle speed.
- DTC P0717 is not failed this ignition.
- Transmission input shaft speed is less than 100 RPM for 5 seconds.