LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS Base, 3.6 7, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 24 (Engine Mechanical - 4.6L (LH2) - 3 Of 5) >> Off-Vehicle Repair Instructions (Part 2) >> Piston, Connecting Rod, and Bearing Cleaning and Inspection - Off Vehicle >> Piston Cleaning Procedure

Piston Cleaning Procedure

WARNING: This page is about a different variant/trim than selected.
    IMPORTANT: DO NOT wire brush any part of the piston.
  1. Clean the piston and piston pin with solvent.
    2. CAUTION: Refer to Safety Glasses Caution .
  2. Clean the piston ring grooves with a groove cleaner. Ensure the oil ring holes and slots are clean.
  3. Dry the piston and piston pin with compressed air.
scientia non olet · About LEMON Manuals