Inspection Procedure
WARNING: This page is about a different variant/trim than selected.
- Inspect the front of the water outlet housing for the following:
- Damage or restrictions to the radiator hose connection (1)
- Damage to the water outlet housing-to-cylinder head mounting holes (2)
- Damage to the engine coolant air bleed fitting (3)
- Damage to the water outlet housing (4)
- Damage or restrictions to the bypass hose connection (5)
- Inspect the rear of the water outlet housing for the following:
- Damage to the gasket sealing surface (1)
- Damage, blockage or excessive corrosion to the engine coolant passages (2)
- Repair or replace the water outlet housing as necessary.