Installation Procedure

WARNING: This page is about a different variant/trim than selected.

Fig 1: View Of Cylinder Head With Alignment Dowels - Left

Courtesy of GENERAL MOTORS CORP.

Install the left cylinder head. Refer to Cylinder Head Installation - Left Side .

NOTE: Refer to Fastener Notice .

Install the power steering reservoir and return hose retaining bolts to the cylinder head.
Tighten: Tighten the power steering reservoir and return hose retaining bolts to 50 N.m (37 lb ft).
Install the following subassemblies:
- The left camshafts-Refer to Camshaft Replacement - Left Side .
- The left secondary camshaft drive chain-Refer to Secondary Camshaft Drive Chain Replacement - Left Side .
- The water crossover-Refer to Water Outlet Housing Replacement (LC3) .
- The supercharger-Refer to Supercharger Replacement .
- The left exhaust manifold.