LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2006 >> STS Base, 3.6 7, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (Engine Mechanical - 4.4L (3 Of 5)) >> Off-Vehicle Repair Instructions (Part 2) >> Engine Block Cleaning and Inspection - Upper - Off Vehicle >> Cylinder Bore Diameter Measurement Procedure

Cylinder Bore Diameter Measurement Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Measure the cylinder bore diameter at 41 mm (1.61 in) below the cylinder block deck surface using the J 8087  .
  2. Compare your results with the engine mechanical specifications. If the cylinder diameter exceeds the specifications, the cylinder block must be replaced. There are no oversized pistons available for service.
scientia non olet · About LEMON Manuals